Friday, November 20, 2009

Wedding Program Wording Non Denominational

Catching the rainbow (copper matte)

"red fugitive" or whatever you call these latitudes. After leaving several pieces as before, with the guidance of Marta Midaglia think what we achieved, the issue goes to play and risk, or as she says "must try" and so we spent several evenings playing with fire, making smoke and a great time having fun, because if something nice is to try to catch the color before the piece to fill in again and we have to start over. It is a challenge and I assure you will be surprised with the results.


Formula:
89% copper oxide Water, enough to let something very liquid.

When this pseudo prepare glaze, do not have to glaze consistency, add water to make it as dirty water, and we can add a spongy piece with a brush or a sponge or with a torch. Clarified, it is not a glaze.
Preparation: Make a bed of sand on a couple of common bricks or on the ground directly (if they have a place to land to do so) or in any old pan on the sand bed with sawdust to make a nest, not a volcano, a simple and humble nest as the birds and pour a splash of kerosene rather stingy. you can get a tape but adjusted to the size of the piece, let's play resulting in fire and drown the piece. Have ready a pitcher a little bit more of kerosene to fuel the fire (after I explain how)

piece once red-hot (reaching 950 º C approx) out of the oven raku and put on this little nest of sawdust, then going to burn the sawdust will cause flame and the piece will begin to change color, so it is called "catching color," appear pink, blue, red, yellow, are only seconds, as we see coming down the flame will add a chorritito kerosene, but not cause firefighters coming and taking care of burn. immediately fill the room with the can and smother the flames, wait a little while, with proper gloves, lift and see what happens in the piece, thousandths of a second! then we will see that change the color of the piece, quickly plug! uncover and cover again playing to see what colors are, eye, not let the piece from rusting again because otherwise we have black as before, here played by flames and reduction. Allow to cool in the tin covered without anxiety. In a hurry lost several color. The worst thing
can happen is that we have to re-take the piece back in the oven, bring to 950 º C and repeat the process.
Here I give you the photos. It is not raku raku is not nail polish and is otherwise. They say that with time and depending on the glaze used, the colors are fading ... is one year, maybe longer, but worth a try.








Now we have to be a bit more creative and to try to make reservations, guards or whatever in the pieces with this technique. There are other formulas running around on the Internet. Be a matter of taste ...

Wedding Program Wording Non Denominational

Catching the rainbow (copper matte)

"red fugitive" or whatever you call these latitudes. After leaving several pieces as before, with the guidance of Marta Midaglia think what we achieved, the issue goes to play and risk, or as she says "must try" and so we spent several evenings playing with fire, making smoke and a great time having fun, because if something nice is to try to catch the color before the piece to fill in again and we have to start over. It is a challenge and I assure you will be surprised with the results.


Formula:
89% copper oxide Water, enough to let something very liquid.

When this pseudo prepare glaze, do not have to glaze consistency, add water to make it as dirty water, and we can add a spongy piece with a brush or a sponge or with a torch. Clarified, it is not a glaze.
Preparation: Make a bed of sand on a couple of common bricks or on the ground directly (if they have a place to land to do so) or in any old pan on the sand bed with sawdust to make a nest, not a volcano, a simple and humble nest as the birds and pour a splash of kerosene rather stingy. you can get a tape but adjusted to the size of the piece, let's play resulting in fire and drown the piece. Have ready a pitcher a little bit more of kerosene to fuel the fire (after I explain how)

piece once red-hot (reaching 950 º C approx) out of the oven raku and put on this little nest of sawdust, then going to burn the sawdust will cause flame and the piece will begin to change color, so it is called "catching color," appear pink, blue, red, yellow, are only seconds, as we see coming down the flame will add a chorritito kerosene, but not cause firefighters coming and taking care of burn. immediately fill the room with the can and smother the flames, wait a little while, with proper gloves, lift and see what happens in the piece, thousandths of a second! then we will see that change the color of the piece, quickly plug! uncover and cover again playing to see what colors are, eye, not let the piece from rusting again because otherwise we have black as before, here played by flames and reduction. Allow to cool in the tin covered without anxiety. In a hurry lost several color. The worst thing
can happen is that we have to re-take the piece back in the oven, bring to 950 º C and repeat the process.
Here I give you the photos. It is not raku raku is not nail polish and is otherwise. They say that with time and depending on the glaze used, the colors are fading ... is one year, maybe longer, but worth a try.








Now we have to be a bit more creative and to try to make reservations, guards or whatever in the pieces with this technique. There are other formulas running around on the Internet. Be a matter of taste ...

Wednesday, November 18, 2009

Closet Maid Closet Tower

My gadget in copper matte raku! Technical

For step by step how to do a plaster cast, here I pass the link to the blog of a classmate, Susan, that she could explain better than me how it is to make a cast of three Taselaar: Erdgeist
Molde ready to receive plaster, centered and placed formwork

Taselaar Plaster setting of the first, and it took the kindling that formwork made

Taking off the bottle of plaster, ok!

Buuhhhh! (and took pictures
Susana
)

Closet Maid Closet Tower

My gadget in copper matte raku! Technical

For step by step how to do a plaster cast, here I pass the link to the blog of a classmate, Susan, that she could explain better than me how it is to make a cast of three Taselaar: Erdgeist
Molde ready to receive plaster, centered and placed formwork

Taselaar Plaster setting of the first, and it took the kindling that formwork made

Taking off the bottle of plaster, ok!

Buuhhhh! (and took pictures
Susana
)

Sunday, November 15, 2009

World Landscapes For Fsx Reinstall New Pc

"Catching the color" or copper-matte or

I'm bleeding. It turns out that at last, after tuning and tempering furnaces for baking bricks for the oven bottle, after enduring the smoke that left us with red eyes when the sawdust bricks began to catch fire (this was when we played approx. 300 ° C) and had to turn off the oven because it was impossible that the school continue to give the other classes, we let Tuesday the final spongy, bright and early and without students taking courses for which they suffered no smoke again.
the end, there was no smoke (had already burned all of last Thursday). I arrived that day after work at about 15 pm. (We took turns between students and Marta, the teacher was the one that was from start to finish), and was about 700 degrees C, but had seen the gas furnace in operation, had never made a baked into it and I loved the issue of control air nozzle, constantly looking burners, gas pressure, the opening of the run ... was a good experience, which included a burner off accidentally while to the temple and therefore take all precautions for the restart, allow it to ventilate the oven in case of gas that has accumulated inside (they were two seconds) but we did everything as if we had not seen when turned off, practice and memorize them again and again closing the key steps in case of emergency, including power outages. With these bugs bigs not be neglected.
Long before we had anticipated, at 18:40 fell on top cone indicating that it had reached 1200 ° C. At 19:00 hs. lower cone fell off and proceeded to complete the oven.










I

awards they were placed in a small oven and walkways almost pressure, stacked one over another. we should have grabbed a bigger oven and place the army leadership to cook supported by all sides concerned, in the same manner as is allowed to dry. We did and we paid a heavy price for not doing so.

do now return to the top again. Agggggg! two months waiting to dry! and above us December grabs! Well, in March will put his hand again. I know it's not for my oven, is for school, but we put so much grip as if to us and we were doing to the yard of our house! Aaaggggg!. This dome
broke, let's see if we can at least patch up and stick with refractory cement, but I have my doubts as to withstand the heat without breaking down or split again, but at least we make a batch before December.
Trial and error. Trial and error. I have no consolation.



same, and begin to level the floor where they place the oven and produce bricks that will form the floor. The show must go on.







World Landscapes For Fsx Reinstall New Pc

"Catching the color" or copper-matte or

I'm bleeding. It turns out that at last, after tuning and tempering furnaces for baking bricks for the oven bottle, after enduring the smoke that left us with red eyes when the sawdust bricks began to catch fire (this was when we played approx. 300 ° C) and had to turn off the oven because it was impossible that the school continue to give the other classes, we let Tuesday the final spongy, bright and early and without students taking courses for which they suffered no smoke again.
the end, there was no smoke (had already burned all of last Thursday). I arrived that day after work at about 15 pm. (We took turns between students and Marta, the teacher was the one that was from start to finish), and was about 700 degrees C, but had seen the gas furnace in operation, had never made a baked into it and I loved the issue of control air nozzle, constantly looking burners, gas pressure, the opening of the run ... was a good experience, which included a burner off accidentally while to the temple and therefore take all precautions for the restart, allow it to ventilate the oven in case of gas that has accumulated inside (they were two seconds) but we did everything as if we had not seen when turned off, practice and memorize them again and again closing the key steps in case of emergency, including power outages. With these bugs bigs not be neglected.
Long before we had anticipated, at 18:40 fell on top cone indicating that it had reached 1200 ° C. At 19:00 hs. lower cone fell off and proceeded to complete the oven.










I

awards they were placed in a small oven and walkways almost pressure, stacked one over another. we should have grabbed a bigger oven and place the army leadership to cook supported by all sides concerned, in the same manner as is allowed to dry. We did and we paid a heavy price for not doing so.

do now return to the top again. Agggggg! two months waiting to dry! and above us December grabs! Well, in March will put his hand again. I know it's not for my oven, is for school, but we put so much grip as if to us and we were doing to the yard of our house! Aaaggggg!. This dome
broke, let's see if we can at least patch up and stick with refractory cement, but I have my doubts as to withstand the heat without breaking down or split again, but at least we make a batch before December.
Trial and error. Trial and error. I have no consolation.



same, and begin to level the floor where they place the oven and produce bricks that will form the floor. The show must go on.